Hi thanks for your reply unfortunately the leak is actually between the sleeves bush and the camshaft there is no seal there just metal to metal contact
Simon Nuske
Interlock Dept
Dräger Safety Pacific Pty Ltd
Axxess Corporate Park
Unit
Tel +61 (0) 3 9545 5619
Fax +61 (0) 3 9545 5687
Mobile +61 (0) 427 561306
Simon.nuske@draeger.com
Dräger. Technology for Life ®
From: st2_owners@yahoogroups.com [mailto:st2_owners@yahoogroups.com] On Behalf Of Pete Augenbergs
Sent: Friday, 29 October 2010 10:33 AM
To: st2_owners@yahoogroups.com
Subject: Re: [DucatiST] Oil leak
I had a leak there on my 99 ST4 on the vertical cylinder cam pulley seal. I ended up having both seals replaces on the vertical cylinder.
-p
On Thu, Oct 28, 2010 at 2:06 PM, hillmanall@y7mail.com <simon.nuske@draeger.com> wrote:
I have a 99 St4 and recently noticed a little oil staining around the cam belt cover on stripping I traced the leak to the sleeve on the camshaft behind the belt roller, its not leaking past the seal its wicking up the shaft and consequently over the belt has any one had this happen before and will a little sealant fix it? Cheers Simon
This communication contains confidential information. If you are not the intended recipient please return this email to the sender and delete it from your records.
Diese Nachricht enthält vertrauliche Informationen. Sollten Sie nicht der beabsichtigte Empfänger dieser E-mail sein, senden Sie bitte diese an den Absender zurück und löschen Sie die E-mail aus Ihrem System.
0 comments:
Post a Comment