Sports: Re: [DucatiST] was quiet clutch mod, now engagement height

I found a bid improvement by simply changing the fluid / bleeding the
slave cylinder. I guess that the lever travel was increased due to air
meaning you have more work to put in.
Also adjusting the positioning of the set screw that the lever end acts on......

Good luck!

Alasdair

2002 ST4S

On 10/28/10, Nick Woods <nickw@cooptel.net> wrote:
>
>
> --- In st2_owners@yahoogroups.com, "Reed Kyrk" <reed.kyrk@...> wrote:
>>
>> Is there a way to get my clutch to engage midway thru the lever release?
>> Mine is all the way at the end and can be more tiring than necessary.
>>
>> Thanks! I mostly lurk but the collective wisdom been very helpful.
>>
>> Reed
>> Central NJ
>
>
> How much free travel have you got? Can you get neutral at a standstill
> without pulling the lever right in? This would be pretty unusual for an ST
> but if so, you can simply increase the clearance at the lever by unscrewing
> the adjustment screw by the pivot. These are glue-locked at the Factory, but
> they have a spring detent which will stop them moving in use.
>
> NickW
>
>

--
Sent from my mobile device