Sports: Re: [DucatiST] marchesini GAP

Hi Lee, they look the same profile as on my ST4s, I will throw a measure across the swing arms in the morning and let you know the numbers, too dark to do it at the minute, ride it safe. Mike.

From: Lee <lw22@wideband.net.au>
To: st2_owners@yahoogroups.com
Sent: Tue, 30 November, 2010 8:31:21 PM
Subject: Re: [DucatiST] marchesini GAP

MMM 4 mm guess i can space that out, thanx TOM,
I got em here http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=260671118973
Could anyone with an ST4's please give me an accurate measurement of the swingarm width at the rear to confirm, cheers. regards.lee

--- In st2_owners@yahoogroups.com, T <st2_@...> wrote:
>
> Sounds like you got a wheel for an SS, at's 4mm narrower disk-sprocket.
> I never did get around to figuring out on which side, though, I should
> do that some time (I've got an SS 1000 and an ST2).
>
> Tom
>
> On 30-Nov-10 06:33, Lee wrote:
> > liSTers, any of you change your 3 spokers (from ST4) to the 5 spoke Marchesinis , and did you use any different spacers.
> > I have recently purchased a set from Italy, front fits fine, rear when fitting and before tighetning has more gap on the axle,and obviously would tighten using too much of the nuts on each side.
> > I pulled it and measured as best i could and it appears the sprocket carrier needs to be spaced out another 5mm, this would need to be done where the carrier sits against the wheel where the cush drives are, bit funky for my liking , am i missing something???, any help much appreciated, regards.lee ALMOST ready for a good ride in 4 days time
>