OK, measured my ST2 (1998) and SS1000DS (2003) rears today.
Bearing to bearing (outer edges). ST2 178.5mm, SS 174.0mm, (ST2 is wider by 4.5mm)
Sprocket side flange to brake side flange: ST2 163.5mm, SS 159.0mm, (ST2 is wider by 4.5mm)
Bearing on sprocket side is flush with outer edge of bearing.
Also, both cush drive are identical, 20mm high.
A straight edge along the sprocket side flange of the SS wheel will just clear the rim, but not the tire.
A straight edge along the sprocket side flange of the ST2 rim clears both the rim and the tire.
Both tires are 180/55, and both rims are 5.5" wide.
So it seems that the ST2 rim is wider by 4.5mm on the sprocket side than the SS rim.
Tom
0 comments:
Post a Comment