I agree Derek, mine work well and were fitted as per the instructions here abouts i dont have the upper fairing brackets (they werent available at the time).
As a side note to all who recommend carrying a tool to undo the wellnuts id suggest you dont carry that tool under the seat, you see if you drop your key (and its alone) theres this little spot inside your fairings where it can hide,YES ive bloody done it!!!! if you laugh i know where you all live..
Lee in OZ looking forward to a spin to Wilsons Promontary tomorrow
--- In st2_owners@yahoogroups.com, Derek Blackie <d.w.blackie@...> wrote:
>
> You adjust the fit of Dzus fasteners by adding or subtracting the number of
> thin plastic washers between the fastener and the fairing. Too little and
> the fastener is loose and will fall out, too many and it won¹t turn far
> enough to click over the ramp and keep it held tight. In the 5 years or so
> since I fitted them I haven¹t lost one yet.
>
> Derek
> '03 ST4s abs
> Scotland
>
>
>
> On 11/02/2011 03:49, "Don" <donducst3@...> wrote:
>
> >
> >
> >
> >
> >
> > I used the kit as directed and no problem with fitment on my 4004 ST4S. Zoo
> > fasteners did keep falling out - went back to well nuts and am happy with
> > result; some racers use tape to keep Dzus fasteners in place... Don Green
> > Vancouver WA
> >
> >
> >
> >
> >
>
0 comments:
Post a Comment