Any websites to purchase? Also is it a diffulcult install
Sent on the Sprint® Now Network from my BlackBerry®
Mine used to backfire alot on downshifting (engine braking) when I first bought the bike because it was tuned so lean out of the factory. It was really rough through 4,000 rpm. Then I re-chipped the bike and all was good. If your bike still has the stock chip, I would replace it with an aftermarket one from either DP, FBF, or FIM.
Guys,
I have a 01 ST2 which I just purchased. Bike has 5500 miles on it. It sat for a good 7 months. Dealer performed the 6k service. Is it normal for the bike to spit at certain times of down shifting?Sent on the Sprint® Now Network from my BlackBerry®
From: "nate_isu_2000" <nateducst2@gmail.com>Sender: st2_owners@yahoogroups.comDate: Wed, 28 Sep 2011 16:21:21 -0000ReplyTo: st2_owners@yahoogroups.comSubject: [DucatiST] Re: Dreaded Tyre/tire threadehh... Why not just throw in the ole' dyna beads, and forget about all that junk? I mean, come on... We all trust the lil magic beads... Don't we? :P
Nate
--- In st2_owners@yahoogroups.com, Michael Heth <mheth@...> wrote:
>
>
> On Sep 25, 2011, at 4:22 PM, Ray Tushingham wrote:
>
> > How are you finding the secondary balance spot??
>
>
>
> Put the tire at 12 oclock and swipe it lightly so it will rotate down past 6 and up over 12 again and see where it stops.
>
> Use enough force so that it slowly rotates 2-3 times. Don't spin it fast as that just makes things take longer.
>
> Do this a few times.
>
> If it always stops at a random point then you have no secondary imbalance.
>
> I also balance my tires using the actual axle on abec 7 bearings and not a cone/rod type arrangement.
>
> http://en.wikipedia.org/wiki/ABEC_scale
>
> HTH.
>
> Thanks,
>
> M./
>
> Michael Heth
> mheth@...
> (415) 992-7840
>
0 comments:
Post a Comment