Thanks Gareth
I want to do away with the plastic joiner and soldier the wires together, so I guess it does'nt matter which two yellow regulator wires I use, and just tape up the third yellow wire which won't be used.
what do you think?
Barry
--- In st2_owners@yahoogroups.com, Gareth Williams <ghw2002tii@...> wrote:
>
> Barry,
> The '97/'98 ST2 used a 2 wire stator. The stock regulator was prone
> to over heating and failure. My guess is someone replaced it with a
> non-stock unit for a 3 wire system - that's how my '98 is setup. You
> end up just using 2 of the 3 rectifiers in the regulator.
>
> Gareth
>
> On Wed, Feb 1, 2012 at 4:16 AM, tomlinsonbarry
> <tomlinsonbarry@...> wrote:
> > Hi I'm back with a question this time.
> >
> > While reading up on ST problems I found a mention of discoloured white connectors on the regulator to stator wires.
> >
> > So I checked mine, and found it was discoloured, melted, broken and generally in very bad shape.
> >
> > but that's not what confuses me, it's the fact that there's two wires going into the connector on the stator side, three wires coming out on the reg side.
> >
> > does that sound right? for a 1997 ST2
> >
> > Thanks
> > Barry
> >
> >
> >
> > ------------------------------------
> >
> > To unsubscribe from the list please send an email to: st2_owners-unsubscribe@...! Groups Links
> >
> >
> >
>
0 comments:
Post a Comment