Nate,
Okay, I have looked at the parts fiche and now I know which ones you need.
All I have to do is get out to the garage to figure out which one is the
replacement.
The way these things are specified is by the thread size and pitch of the
screw that fits in. Then the barrels come in different lengths and the heads
in different diameters. One of the ones that I have the heads are too large
a diameter. Makes them a bit of a pain to mount, but they do work. I bought
them over the phone, which was probably a mistake.
Where are you located?
Dave G
-----Original Message-----
From: st2_owners@yahoogroups.com [mailto:st2_owners@yahoogroups.com] On
Behalf Of nate_isu_2000
Sent: February-06-12 9:21 AM
To: st2_owners@yahoogroups.com
Subject: Re: [DucatiST] swingarm holes for rear hugger
Thanks guys for the responses! I'll look into the rivetnuts, sounds like
the way to go!
Dave, I have no idea what size those well nuts are, I looked at the parts
diagram and they don't list a size for the screws or the well nuts. I
bought a couple sizes at the local store, and neither one of them fit.
The Ducati part number I have is 0000.63150 I need 3 of them. I just
ordered a bunch of stuff through duc omaha, I wish I would have needed
these when I placed the order. Duc omaha is friggin sweet right now,
they have free shipping over 25 bux!
Nate
--- In st2_owners@yahoogroups.com, David Gooch <doghaus@...> wrote:
>
> Your local fastener store will also sell well nuts. You may have to buy a
> box of 50, but it will be cheaper than getting them from a specialty
> supplier. How many do you need and what size? I have lots because I bought
> the boxes!
>
>
>
> Dave G
------------------------------------
To unsubscribe from the list please send an email to:
st2_owners-unsubscribe@yahoogroups.comYahoo! Groups Links
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2112/4790 - Release Date: 02/05/12
0 comments:
Post a Comment