--- In st2_owners@yahoogroups.com, Bob Marren <bmarren@...> wrote:
>
> On 3/24/2012 2:56 PM, Kevin Holder wrote:
> > Hello All,
> >
> > I am having a problem with my bike(98 ST2) and I have a CD copy of the
> > manual, but I have not been able to find the answers. I am having some
> > electrical issues, I tested the battery and that works great, but I
> > was wondering if there is anyone that can help me or knows the following?
> > 1. What is the OEM resistance of the stator?
> > 2. What are the AC output specs?
> >
> > Thanks in advance for any help at all!
> > Kevin
> > Kevin Holder
> > T-Rex Realty
> > Mobile 704.634.3609
> > Fax 704.821.1440
> > KevinHolder@...
> > www.T-RexRealty.com
> >
> Kevin, my ST2 is a 99 so its the three phase stator and not the
> single phase. You should see from 35 to 55 volts AC on the leads with
> the engine running.
> And the stator leads should not read to ground.
>
> Hope this helps a little Bob
I have a '98 ST2.
With the 2 yellow leads disconnected from the stator, I saw:
- 24v @ 2k rpm
- 61v @ 4k
- 101v @ 6k
The regulator/rectifier takes it down to 13-14v.
Yellow to yellow resistance was 0.3 oms.
Yellow to ground should be infinite, as Bob said. Otherwise, there's a short; not good.
What problem are you having?
Phil
0 comments:
Post a Comment