--- In st2_owners@yahoogroups.com, <doghaus@...> wrote:
>
>
>
> I think I may have answered my own question with respect to size,
> with a little help from McMaster Carr's website.
>
> I know that I use a
> 8mm socket to remove the screws. That make them M5x0.8 since that is the
> only way they come.
>
> Local supplier has them in stock and is willing to
> sell them by the each or by the box. They close at 5:00 and I will be
> there before then!
>
> Despite recommendations, I am going to use lock nuts
> to secure the mirrors. I want to makes sure that tools are required to
> remove the parts!
>
> Thanks for all of your help.
>
> Dave G
>
Dave, I think you'll find they are 6mm threads, even if the head of the OEM bolt is a 8mm hex. This is a favourite Ducati/Cagiva ploy!
Whatever, I used nyloc nuts inside but the biggest help was to make some big thick nylon washers that I could keep hold of while working up-and-under! So-called 'penny' washers (or repair washers) would be almost as good, but you'll be cursing if you just go for normal small-diameter ones....
NickW
0 comments:
Post a Comment