You could try chemical metal/ JB Weld. Make sure you roughen the surfaces it
attaches to so it bonds well. Use it to attach the broken part of the
pillar and then build up material around it to encase the whole thing.
> -----Original Message-----
> From: st2_owners@yahoogroups.com
> [mailto:st2_owners@yahoogroups.com] On Behalf Of mike
> Sent: 02 July 2012 20:28
> To: st2_owners@yahoogroups.com
> Subject: [DucatiST] seat panel repair
>
> Hi all. I guess many of you may have needed to repair the seat panels as
it is a
> pretty crappy design. The plastic pillar holding the threaded insert
always
> seems to be stressed and ends up cracking as one of mine has just done. It
> has not actually broken but the insert has come out. When this happened
> before i used araldite to repair it but this lasted a very short time and
I
> replaced the panel. Anyone got any recommendations as to how to repair
> this to last?
> Mike
> South Wales
> 2001 ST4
0 comments:
Post a Comment