Thank you for the input James,
The speedo (dash) of the 2004 and later model ST4S is quiet different than the previous models. Immobilizer system (antenna included)is integrated in the full digital dashboard. Plugging a new dash need a special procedure with red key for coding the new dash. Unfortunately, this is not mensioned neither in owner's manual nor in service book.
Any other friend having an idea on this issue ?
Thanks,
--- In st2_owners@yahoogroups.com, "James Murphy O'Connor" <james@...> wrote:
>
> I had the same problem on an 02 ST4S and replaced mine recently. It was a
> straight swap for me; as far as I know it has no interaction with the
> immobiliser (this is in the rev counter) and might be the same for the
> later model.
>
> Regards,
>
> James
>
> On Sun, Oct 28, 2012 at 1:01 PM, Viktor <vikviktortor@...> wrote:
>
> > **
> >
> >
> > Dear Friends,
> > Digital instrument panel of my 05 ST4S-ABS was getting faulty. So, I have
> > found a new one on Ebay (seller says that it's virgin, never mounted on a
> > bike) and bought it.
> > Does anyone in the group have any idea how to proceed when replacing the
> > digital speedo without having trouble with immobilizer code ? BTW, a have
> > the red key but not code card.
> > Thanks in advance,
> >
> >
> >
>
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (3) |
0 comments:
Post a Comment