Jack in NC
On 1/29/2013 7:26 PM, David Gooch wrote:
Yes, the TPS on an ST2 is adjustable, at least on my 2002.
Dave G
From: st2_owners@yahoogroups.com [mailto:st2_owners@yahoogroups.com] On Behalf Of nick alaniz
Sent: January-29-13 1:39 PM
To: st2_owners@yahoogroups.com
Subject: Re: [DucatiST] Power programmer
Hey Tony,
So what are you trying to accomplish?
Airbox or exhaust mods, or both?
I haven't worked on an ST2 in a while and can't remember if the TPS (throttle position sensor) is adjustable.
IIRC, the power programmer just dumps in a little more fuel, mostly on the bottom end, to compensate for leaner running. Or does that model also adjust the ignition timing?
If your TPS is adjstable just dial in a few more millivolts, (backprobe the connector with a volt meter set to MV).
Remember to record the starting voltage so you can always set it back to that value.
Or, you can turn in your throttle body bypass screws all the way in and re-synchronize the TB's, which will advance the butterflys (and the tps voltage) and fool the ECU in adding more fuel.
Of course this will add fuel across the range and will cut into your fuel mileage slightly, but it is usually hardly noticeable.
Cheap, easy, and reversible.
Keep us posted, and good wrenching.
Chee-yow,
Nick Alaniz, 2002 ST4$
From: Tony Leonardi <tonyleonardi@rocketmail.com>
To: "st2_owners@yahoogroups.com" <st2_owners@yahoogroups.com>
Sent: Fri, January 25, 2013 4:32:26 PM
Subject: [DucatiST] Power programmer
Hey everybody
I am looking for a power programmer for my 98st2.
If anybody has one they want to part with please contact me.
Thanks!
Tony.
< /o> No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2890 / Virus Database: 2638/6031 - Release Date: 01/13/13
Internal Virus Database is out of date.No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2890 / Virus Database: 2637/6023 - Release Date: 01/10/13
Internal Virus Database is out of date.
Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (16) |
0 comments:
Post a Comment