Sports: Re: [DucatiST] Re: Steering Head Bearing Replacement

Thank You Nick and Randy, a few taps and it came right out. I was just afraid to hit it before I knew it was ready. Also the park tool was perfect and the races came out with no effort. I am picking up my forks at Traxxion
today so I will see if they will pull the lower race off the steering stem for me. Otherwise I think I'm going to go get a bearing removal tool from O'Reilly's.
Thanks again,
Richard

On May 31, 2013 12:24 AM, <rntdumont@charter.net> wrote:
>
>
>
> You are on the right track. Since the OEM used roller bearings, the inner races may be a little stuck to the steering stem.
> Randy
>
> Sent from my Verizon Wireless BlackBerry
> ________________________________
> From: "goforthnconquer" <rcgoforth@gmail.com>
> Sender: st2_owners@yahoogroups.com
> Date: Fri, 31 May 2013 03:22:32 -0000
> To: <st2_owners@yahoogroups.com>
> ReplyTo: st2_owners@yahoogroups.com
> Subject: [DucatiST] Re: Steering Head Bearing Replacement
>
>
>
>
> Alright, I am in the middle of it now, bike hanging nicely from a beam secured across the rafters, I pulled off the top yoke, and unscrewed the steering stem nut.
>
> Now it seems like the bottom yoke and steering stem should just pull out, but they seem to be quite immobile. Is it possible that I missed loosening something? Is there a missing step? Should I just be more persuasive with a rubber mallet against the top of the steering stem?
>
> Thanks,
>
> -Richard
>
>