Hello Derek,
would the slope prevent the forks to slide perpendicularly in the holes or else?
What if I replaced the whole triple tree?
The Monster/SS approach isn't bad either.
Thanks,
Francesco
--- In st2_owners@yahoogroups.com, "Derek Blackie" <d.w.blackie@...> wrote:
>
>
>
> Hi Francesco,
>
>
>
> The top yoke from an ST3 or late ST4s won't fit because they slope downwards
> from the steering stem by 15-24mm, but the yoke from a Monster is flat and
> will fit. It will however have the handlebar clamps but these could easily
> be machined off. There are aftermarket yokes available to fit Monsters
> without the clamps but they are quite expensive.
>
>
>
> Derek
>
> '03 ST4s ABS
>
> Scotland
>
> _____
>
> From: st2_owners@yahoogroups.com [mailto:st2_owners@yahoogroups.com] On
> Behalf Of Francesco
> Sent: 28 December 2010 02:31
> To: st2_owners@yahoogroups.com
> Subject: [DucatiST] Top Triple Tree Clamp
>
>
>
>
>
> Hello,
>
> I recently acquired a pair of clip-ons from the latest style ST4s and they
> obviously don't fit the old style clamp since they are meant to go below the
> clamp itself pivoting on a pin.
>
> Can I use the top triple tree clamp from a ST3 or newer ST4S on the first
> ST4?
>
> Are the forks of the ST series all the same diameter?
>
> Any downside?
>
> Francesco
> 1999 ST4
>
0 comments:
Post a Comment