Jack in NC
On 12/4/2012 12:13 PM, nate_isu_2000 wrote:
Just did my 98'ST2 a few months back.... WOW, it sucks... Had to remove shock/linkage, foot pegs, and the crankcase breather setup. Exhaust fits very tight, and only goes in one way.
After everything was out of the way, sort of :) I had to grind/ cut down a small wrench I had to allow me to get it in there and get a good hold on that nut. Without that, I would have never got to it.
Don't be afraid to cut down/grind/bend wrenches, screw drives, drifts, hemostats, fingers; well, anything that you need smaller/skinner to fit. This is my secret as a shade tree mechanic... I have a bunch of tools laying around that I modified to make life easier!
Nate
98'ST2
Charleston, SC
>
> I am really struggling to access the nut on the right hand side ( as you sit on the bike) of the collar that holds the exhaust onto the rear cylinder. Any ideas greatfully appreciated
> Thanks
>
>
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (6) |
0 comments:
Post a Comment